Coolers & Cooler Accessories

View as Grid List
Sort by
Display per page

Lynx - Lynx 18-Inch Drop in Cooler LDC18

$639.00
Fully insulated all welded SS cooler with polished highlights 1.7 cu. ft. capacity

Delta Heat - 15-Inch Drop-In Cooler - DHOC15D

$1,209.00 $1,277.91
This stainless steel drop-in outdoor ice chest and it's quality construction will keep your beverages cold on even the hottest days.

Yeti Bear-Proof Lock Two-Pack - YL2

$16.99
The YETI Tundra® and Roadie® meet the Interagency Grizzly Bear Committee (IGBC) standards for bear-resistant containers when used with extra-long shank Master locks. Our hard coolers have been thoroughly tested in both controlled bear simulations and with wild grizzly bears. When padlocks are used properly, grizzlies get nothing but frustrated after coming across your cooler.

Yeti Beverage Holder - YTBH

$24.99
Keep your beverage within reach on the boat, at the campsite, or on the river. The YETI® Beverage Holder mounts to the side of your YETI Tundra, Roadie or Tank® and serves as a secure and convenient caddy for your frosty beverage. This heavy-duty, powder coated stainless steel holder slides securely into the AnchorPoint™ Tie-Down slot of your YETI, but doesn’t get in the way of opening your cooler to grab another frosty beverage. Compatible with the Rambler Colster®, 20 oz Rambler Tumbler, 30 oz Rambler Tumbler and 18 oz Rambler Bottle.

Yeti Corner Chocks - CC

$79.99
Keep your cooler from slipping or sliding with the YETI® Tie-Down Kit. This kit helps lock your cooler in place on the boat, in your truck bed, or trailer. When not in use, only the low-profile deck plates remain, leaving nothing to trip over. Note: Straps are 4.5 feet long and fit all Tundra®, Roadie®, and TANK® models.

Yeti Drain Plug Two-Pack (Tundra, Roadie)

$9.99
Don’t let your cold-holding power go down the drain. YETI®’s screw-in gasketed Drain Plug lets your cooler drain while the plug is only partially open. Note: Fits Roadie®, Tundra® coolers, and TANK® Ice Bucket Quantity: 2 Replacement Drain Plugs

Yeti Drain Plug w/ Hose Connection

$12.99
Drain your YETI® cooler without lifting a finger. The Drain Plug Hose Connection fits most standard hoses. When not in use, secure the provided cap to lock in your cooler’s cold-holding power. Compatible with Tundra®, Roadie®, and TANK® models.

Yeti Hopper Flip 12 -YHOPF12

$279.99
Say hello to the leakproof, tough-as-nails, carry-the-day soft cooler. Around here, we call it the Hopper Flip™ 12. Like the original Hopper™, the Hopper Flip 12 can withstand serious abuse in the field, even with everyday use. Its wide-mouth opening makes for easy loading and access to your food and drinks. Plus, its compact, cubed body allows for ultimate portability, never slowing you down. It’s the only personal cooler that’s game for full days in the tree stand, early mornings in the duck boat, or afternoons on the water.

Yeti Hopper MOLLE Bottle Opener - YMBO

$9.99
The MOLLE Bottle Opener attaches directly to your Hopper™, meaning you’ll never again be without a way to crack into those frosty brews. Its low profile prevents snagging, attaches snugly for maximum leverage, and is made from corrosion-resistant stainless steel that can take a major beating. As an added bonus, you can attach it to your pack or any other MOLLE rigging just in case your Hopper’s HitchPoint™ Grid is full. Each sold separately. YETI® Hopper not included.

Yeti Hopper MOLLE Zinger - YMZ

$29.99
Keep your multi-tools or bottle openers within arm’s reach with the MOLLE Zinger™ The MOLLE Zinger easily attaches to your YETI Hopper™ HitchPoint™ Grid and its retractable cord is made from braided bomber cord for maximum strength and durability Add on a wide variety of field tools to the flat split ring, from flashlights to bottle openers. Don’t get caught empty handed in the field – keep the MOLLE Zinger close by Each sold separately. YETI® Hopper not included.

Yeti Hopper SideKick - YHOPSK

$34.99
The perfect YETI® Hopper™ accessory to guard your valuables from the wild. The SideKick™ is made of the same puncture-resistant DryHide™ fabric as the Hopper and has a water-resistant zipper for continued use in the field. It mounts to the Hopper’s HitchPoint™ Grid and makes it easy to store wallets, spare keys, and extra gear. Product Dimensions: 9" x 1 1/2" x 5 1/2"

Yeti Hopper Two 20 - YHOPT20

$299.99
The Hopper™ Two expands on the leakproof, portable, ultra-durable design of the original Hopper. We couldn’t turn down the opportunity to make our rugged soft-sided cooler even better. With a couple of tweaks to the Hopper body, we improved cold-holding power, made loading (and unloading) easier, and increased visibility. We also changed the body shape for more comfortable hauling. And all those new features mean you get to spend even more time outdoors doing what you love instead of thinking about your gear. The Hopper Two 20 is still our same leakproof portable outdoor cooler, now with a wider opening and easier access for all your wild adventures.

Yeti Hopper Two 30 - YHOPT30

$349.99
The Hopper™ Two is the evolution of YETI’s first soft cooler, the original Hopper. When we launched the Hopper, we created a portable, leakproof, and tough-as-nails cooler that delivered superior ice retention. But we wanted to push this portable cooler to the next level. With some design changes, we increased cold-holding power, made loading (and unloading) much easier, made hauling more comfortable, and improved visibility. And those changes means for better days outdoors, which is what we’re all about. The Hopper Two 30 is still 100% leakproof and ready to tackle the wild, now with a wider opening and easier access.

Yeti Hopper Two 40 - YHOPT40

$399.99
The original Hopper™ proved that a soft-sided cooler could be anything but soft, and we wanted our new Hopper Two to push the limits even further. With the Hopper Two, we’ve extended the cold-holding power with a tapered body that’s more comfortable on longer hauls. We also wanted to make loading (and unloading) easier and increase visibility — new zipper placement gives you both. And lastly, we wanted to make sure the Hopper Two is still 100% leakproof, tough-as-nails, and keeps ice-for-days. Check, check, and check. The Hopper Two 40 is the soft portable cooler that’s built for larger hauls and longer days, now with a wider opening and easier access.

Yeti ICE 1lb -2C

$14.99
YETI® ICE is filled to the brim with science, dialed in to the most effective temperature to maximize the ice retention of any cooler, with a durable design that is break-resistant. Its custom shape reduces freezing time and multiple size options mean that you can outfit everything from your Hopper™ Flip to your Tundra® 350 with YETI ICE. It works as an ice substitute or welcome addition to your ice stash to make sure your contents stay colder for longer.

Yeti ICE 2lb -2C - YICE2N2

$19.99
YETI® ICE is filled to the brim with science, dialed in to the most effective temperature to maximize the ice retention of any cooler, with a durable design that is break-resistant. Its custom shape reduces freezing time and multiple size options mean that you can outfit everything from your Hopper™ Flip to your Tundra® 350 with YETI ICE. It works as an ice substitute or welcome addition to your ice stash to make sure your contents stay colder for longer.

Yeti ICE 4lb -2C - YICE4N2

$29.99
YETI® ICE is filled to the brim with science, dialed in to the most effective temperature to maximize the ice retention of any cooler, with a durable design that is break-resistant. Its custom shape reduces freezing time and multiple size options mean that you can outfit everything from your Hopper™ Flip to your Tundra® 350 with YETI ICE. It works as an ice substitute or welcome addition to your ice stash to make sure your contents stay colder for longer.

Yeti Rambler Colster Load-and-Lock Gasket

$4.99
The Colster® Load-and-Lock® Gasket is BPA-free and dishwasher-safe. Store in a cool, dry place when not in use.

Yeti Rambler Half Gallon Jug - YRAMHGJ

$99.99
The largest Rambler™ to date, our Half Gallon Jug takes insulation to the next level, complete with a double-wall vacuum to keep drinks cold or hot for hours. Perfect for remote campsites and harsh worksites alike. Unlike narrow-mouthed water bottles that are a hassle to fill or rinse, our Rambler Bottle features Over-the-Nose™ Technology for easy loading, drinking, and cleaning. And it’s BPA-free. In other words, the Rambler Bottle is the only insulated container for cold (or hot) beverages that’s built for the wild.

Yeti Rambler Jug Mount -

$39.99
The Rambler Jug Mount has been crafted from rugged polypropylene, and can be fastened to your work truck, ATV, boat or trailer.

Yeti Rambler One Gallon Jug - YRAMOGJ

$149.99
The largest Rambler™ to date, our One Gallon Jug takes insulation to the next level, complete with a double-wall vacuum to keep drinks cold or hot for hours. Perfect for remote campsites and harsh worksites alike. Unlike narrow-mouthed water bottles that are a hassle to fill or rinse, our Rambler Bottle features Over-the-Nose™ Technology for easy loading, drinking, and cleaning. And it’s BPA-free. In other words, the Rambler Bottle is the only insulated container for cold (or hot) beverages that’s built for the wild.

Yeti Rambler Tumbler Lid

$4.99
Sure, the lids on our Rambler™ Tumblers are shatter-resistant and dishwasher-safe. But you still might need a replacement lid if you happen to misplace yours in the field. Our Rambler Lids are splash-resistant, easy to clean, and completely clear so that you can assess your refill needs at a glance. Dishwasher-safe.

Yeti Roadie 20 Cooler - YR20

$199.99
The YETI® Roadie® is BYOB’s new best friend. Its ColdLock™ Gasket is built just like the Tundra®’s, so ice stays colder longer, and its No Sweat™ Design means you’ll never be stuck mopping up a mess. With its compact body and rotomolded construction, this small but mighty outdoor cooler is ready to hit the road, whether you’re in for a day of tailgating or kicking back at the ranch.

Yeti Rod Holster - YTRH

$39.99
Gain easy rod access whether paddling or boating. Our Rod Holster is made from a single heavy-duty polypropylene tube, attached to a sturdy, stainless steel, powder-coated bracket. It slides securely into the AnchorPoint™ Tie-Down Slot of your YETI® cooler without getting in the way of the lid and makes a secure storage option for your casting and spinning rods. Note: Fits both YETI Tundra® and TANK® series